Used Parts for Forklift - Without doubt, lift truck components would eventually wear out and need replacing. The option of acquiring brand new parts can become pricey so one more idea is to acquire used parts. This can save a lot of money in the long run. It is a great idea to obtain used lift truck components that have been remanufactured. These components will guarantee that you are getting parts that would work for a long time and be productive.
Worn or broken parts that are reproduced are a very cost effective answer as opposed to rebuilding. With rebuilding parts, only the components that are broken or worn out get replaced, which means that other wearable components may break down soon after purchase.
Remanufactured components are cleaned after being taken apart and have the unusable parts changed. This method could offer the best guarantee for used parts. All wearable parts are replaced regardless of age or wear which is another rationale why remanufactured components on the whole work so much better. Any part within the part is new and this provides much longer life to the second-hand part. Based on the lift truck components that are being redone, the cleaning process and the complete remanufacturing process will vary.
After complete disassembly, the engines are oven cleaned. Different components of the engine like for example pistons, spark plugs, rings, valves, valve springs, and filters can be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are oven cleaned, pressure washed, and disassembled. A comprehensive inspection is done to check for any cracks. Bearings, bushings and seals are all replaced. Normally, the replacement parts used on transmission components meet OEM specifications.
Some forklift parts like for example torque converters, the alternator, the water pump, the starter and steer axles could be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can also be remanufactured with replacing all aged and worn out parts. Not like other lift truck components the control card can only have the worn and aged parts replaced.
Components that are reproduced have to be comprehensively checked upon reassembly to ensure they are in good condition prior to being sold. When purchasing these components, it is a good idea to make certain that they have undergone all of the proper testing and inspections. On certain bigger parts like for example engines, transmissions and steer axles, OEM specification replacement components should be used.
The lift truck dealer can guarantee that the components they have reproduced meet the OEM specifications. This would also guarantee the components meet industry standards. Lots of details go into remanufacturing second-hand components. This attention to detail provides more serviceability out of remanufactured components opposed to the components that were simply rebuilt.
Click to Download the pdf